Norton Ghost is one of the best tools that can help us create disk image, backup selected partitions or any important file. And you can boot into the Norton Ghost recovery environment with a recovery disk to restore image backup or troubleshoot other problems.
Symantec Ghost Boot Disk Creator
To create Norton Ghost bootable USB, first, you should format the USB flash drive to NTFS and then copy the contents of the Norton Ghost recovery disk to the USB. Here we take make Norton Ghost 15 bootable USB as an example.
Insert the recovery CD and copy of its files to the bootable USB flash drive. Or if the recovery disk is an ISO image file, you can mount the ISO with a virtual drive program and then copy the files to the USB driver.
I have a disk image (ghost) of the disk need to be restored, and believe the ghost.exe should run from bootable USB with DOS, but I can't seem to create it. My laptop does not have a a cd-rom or floppy drive.I managed to find a Ghost utility that I could load from a bootable USB drive. Unfortunately, when I plug in my NTFS external drive (USB), it is not detected.
Ghost 6.0, released in 2000, includes a management console for managing large numbers of machines. The console communicates with client software on managed computers and allows a system administrator to refresh the disk of a machine remotely. As a DOS-based program, Ghost requires machines running Windows to reboot to DOS to run it. Ghost 6.0 requires a separate DOS partition when used with the console.[6]
The off-line version of Ghost, which runs from bootable media in place of the installed operating system, originally faced a number of driver support difficulties due to limitations of the increasingly obsolete 16-bit DOS environment. Driver selection and configuration within DOS was non-trivial from the beginning, and the limited space available on floppy disks made disk cloning of several different disk controllers a difficult task, where different SCSI, USB, and CD-ROM drives were involved. Mouse support was possible but often left out due to the limited space for drivers on a floppy disk. Some devices such as USB often did not work using newer features such as USB 2.0, instead only operating at 1.0 speeds and taking hours to do what should have taken only a few minutes. As widespread support for DOS went into decline, it became increasingly difficult to get hardware drivers for DOS for the newer hardware.
Norton Ghost 2003, a consumer edition of Ghost, was released on September 6, 2002. Available as an independent product, Norton Ghost 2003 was also included as a component of Norton SystemWorks 2003 Professional. A simpler, non-corporate version of Ghost, Norton Ghost 2003 does not include the console but has a Windows front-end to script Ghost operations and create a bootable Ghost diskette. The machine still needs to reboot to the virtual partition, but the user does not need to interact with DOS. Symantec deprecated LiveUpdate support for Norton Ghost 2003 in early 2006.
Ghost Solution Suite 1.1 is a bundle of an updated version of Ghost, Symantec Client Migration (a user data and settings migration tool) and the former PowerQuest equivalent, DeployCenter (using PQI images). Ghost Solution Suite 1.1 was released in December 2005. It can create an image file that is larger than 2 GB. (In Ghost 8.2 or earlier, such image files are automatically split into two or more segments, so that each segment has a maximum size of 2 GB.) Other new features include more comprehensive manufacturing tools, and the ability to create a "universal boot disk".[further explanation needed]
This version provides a "LightsOut Restore" feature, which restores a system from an on-disk software recovery environment similar to Windows RE, thereby allowing recovery without a bootable CD. Upon system startup, a menu asks whether start the operating system or the LightsOut recovery environment. LightsOut restore would augment the ISO image, which comes with Ghost. The latter contains a recovery environment that can recover a system without a working operating system.
Ghost is marketed as an OS deployment solution. Its capture and deployment environment requires booting to a Windows PE environment. This can be accomplished by creating an ISO (to burn to a DVD) or a USB bootable disk, installed to a client as an automation folder or delivered by a pxe server. This provides an environment to perform offline system recovery or image creation. Ghost can mount a backup volume to recover individual files.
And really, that's it. If you are creating your images from scratch and are familiar with the BIOS approach, it's not too tricky to update this for UEFI.For example, when using diskpart to setup a Legacy BIOS boot for your disk, you might have something like the following script,
I created Ghost Network Boot flash media utizilizing the Ghost Boot Disk Creator, making sure to utililize the 64-bit verision of WinPE 10. My target machines boot fine from the created boot media in UEFI mode as aniticipated, allowing me to start my desired casting sessions and successfully complete my initial ghost image creation for each model. I receive no warning or errors at all during initial creation. Everything completes successfully.
The FOG Project provides a web-based tool for disk cloning, aimed at tying together a variety of open source tools to make it easy to provide image solutions for Windows, Linux, and Mac OS. It used PXE (Preboot eXecution Environment) booting to download a small Linux client and perform the imaging remotely, making it much easier to maintain a large batch of computers than by shuffling around manual disks.
To continue the train of reviews on software developed by LSoft Technologies Inc., I'll be reviewing one of their core products: Active@ Boot Disk. What this software proves itself to be is a powerful disk utility tool that allows the user to create a portable, working bootable disk that...
Ghost imaging (namely backup) refers to a software-driven data backup process that copies the data of a computer hard drive to an individual compressed file, which is called an image. The ghost image copies all the contents - including configuration, applications, settings, etc - to another hard disk drive or server for storage.
2. Where do you want to save the ghost image? An external hard disk, USB flash drive, Pen drive, SSD, HDD, and NAS (Network Attached Storage) are all available. Here, we show you how to ghost Windows 10/8/7 to an external hard drive.
Actually, MiniTool ShadowMaker, ghost image backup software, can also help you. In addition to ghost Windows 10 operating system, it allows you to create a ghost image for the entire hard disk. Just get its Trial Edition to try it out.
Additionally, MiniTool ShadowMaker has another feature - Clone Disk, which has the ability to ghost hard drive in Windows 10/8/7 for disk backup or disk upgrade. It can also be used for laptop disk drive upgrade. Here is the step-by-step guide:
It refers to backing up your Windows, files, disk or partition to an image file. During the backup process, the backup source is compressed by the ghost image software. Once an accident happens to your computer such as system crash, Windows unable to boot after updates, drive failure, etc. you can only restore the image through the original software.
Disk cloning is a method to create an exact copy of a hard drive to another disk. That is to say, all the contents on the source disk including settings, files, programs, etc. are transferred. If you clone a system disk, the target disk can be used to boot the PC in case of system breakdown.
If your hard drive has run out of disk space, exposed to disk write/read failures, or becomes too slow to boot Windows, you will request a hard drive replacement. There are a number of reasons why you might want to clone a disk or clone a hard drive. The following are four typical scenarios for disk cloning.
2. As soon as you launch EaseUS Todo Backup on your computer after installation, the software will prompt you a message asking you to create an emergency disk. This is a very helpful feature in case your computer crashed and won't boot someday. You can try to boot the machine from the EaseUS Todo Backup bootable disk to perform a recovery.
Macrium Reflect Free Edition ( ) is a very popular hard drive cloning solution for both personal (especially the free version) and commercial/enterprise use. It is compatible with Windows operating system, enables you to do disk imaging and disk cloning, allows you to access images from the file manager, and creates a Linux rescue CD. You can fully restore non-booting systems with the free version, as well as schedule backups or create live images of your OS.
Symantec Ghost Solution Suite ( -security/endpoint/management/ghost-solutions-suite) is one of the top hard disk imaging software that enables you to copy hard drive on Windows, Mac, and Linux operating systems. This hard drive cloning tool provides full solutions for imaging and deploying desktops, laptops, tablets, and servers.
Download EaseUS disk clone software now and spend the least effort to copy and clone a hard drive. EaseUS hard drive cloning software is just what you need to copy the exact data content of one hard drive to another, file-by-file and sector-by-sector. No data loss or system boot errors will ever happen.
Please know that status: 0xc0000225 means Windows cannot find the System Files used for booting.1. The System files are corrupt.2. The disk File system has bad configuration. 3. Hardware fault.
It may be, however, that your original disk was GPT format. I cannot find if Ghost 13 supports cloning this type of disk (actually I can't find the documentation for this version). If this is the case, you have to do the Ghosting a specific way (even 11.5 seems to work) and using UEFI bootable media to do the capture and the deploy. See here for the complaint: -disk-image-with-uefi 2ff7e9595c
Comments